Standard PowerHouse® 2x12 Bass Cabinets
We’ve packed an array of innovative features into our exceptional range of premium-built PowerHouse® Bass Cabinet Designs. This diverse series of cabinets offers an unsurpassed level of musical versatility and player convenience through the following features:
Aviation Style Bracing
A radical bracing concept borrowed from the aircraft industry. All structural reinforcement is dado-joined and sculpted to form an extremely strong skeleton that reduces weight, increases rigidity and improves structural integrity.
An innovative, front-facing, multi-vent porting system that uses individually tuned triangular ports to enhance each part of the bass spectrum. Each port is part of the structure and reinforcement of the cab AND speaker baffle in addition to its porting function. This goes way beyond the old standard “shelf” designs or plastic port holes that blow all your tone out of one large port hole!
Player Control™ Network
A proprietary new rear panel interface that provides unprecedented stylistic versatility and gig-friendly convenience includes: three-position switch for selecting your preferred crossover frequency, adjustable L-Pad for blending the right amount of high-frequency driver, resettable horn protection, and standard ¼-inch and high-current SPEAKON locking connectors.
Crossover Style Control & L-Pad Attenuator
The Crossover switch provides three distinct tonal variations: Our time-proven, detail-enhancing sweet 5K (Normal) setting; the harmonic-friendly, accent-expanding snap of 4K (Sheen) and the modern, articulate cut of 3K (Bright). This feature, combined with the fine tuning adjustment potential of our premium L-Pad horn attenuator provides players with unrivaled stylistic high-frequency tweeter versatility and performance.
Instant Reset Horn Protection
A simple, one-touch reset switch provides convenient horn protection. No fuses, tools or digging inside the cabinet if your tweeter gets spiked. Just reset and play!
SPEAKON & ¼-Inch Connectors
Convenient Inputs and Paralleled Outputs are provided for via "combination" connectors that feature both standard ¼-inch AND locking SPEAKON high-current connections contained within the same connector.
Like all Mesa® PowerHouse Series Bass Cabinets, the Standard PowerHouse cabinets represent the world's best-built, best-sounding, easiest-to-move bass enclosures ever made! Make the comparison yourself. Then you'll understand why it's all about Mesa for Bass!
|Build Location||Petaluma, CA USA with the World's Finest Materials|
|Cabinet Material||Marine Grade, Baltic Birch|
|Standard Finish Options||Black Bronco Vinyl with choice of Black (standard) or Silver Metal Grille|
|Custom Finish Options||See Custom Finish Gallery|
Features and Specifications
|Style/Type||Tuned Front Ported Tri-Porting™|
|Speaker(s) & Mounting Position||Custom Eminence toned for Standard PH Cabs|
|High Frequency Horn||Yes|
|Cabinet Impedance||Available in 4 or 8 Ohm (8 Ohm Standard)|
|Connectors||Combination Speakon & 1/4" Input & Paralleled Output|
|Horn Control||Player Control™ Network: Selectable 3-Point Crossover (3k/4k/5k), Premium Attenuator & Instant Reset Horn Protection|
|Minimum Impedance @ Frequency|
|Average Sensitivity (RMS) 50Hz-1000Hz|
|Maximum SPL - 50Hz-1000Hz|
|Average Thermal Power (RMS) 50Hz-1000Hz|
|Average Mechanical Power (RMS) 50Hz-1000Hz|
|Minimum Mechanical Power (RMS) @ Frequency|
|Low Freq F3 (Hz)|
|Low Freq F6 (Hz)|
|Low Freq F10 (Hz)|
|High Freq Response|
|Transport Assistance||Included - Track-Loc™ Removable Casters|
|Slip Cover||Included - Fitted Slip Cover|
Weight And Dimensions
DISCLAIMER: In the interest of continuous improvement, all specifications are subject to change without notice. To guarantee correct fit on custom ordered cases & covers, MESA recommends that customers make personal measurements of their product, after they have been received. MESA provides these measurements as a general reference only, without guarantee or liability.