Traditional Powerhouse® 6x10 Bass Cabinet
We've packed an array of classic features into our custom-built Traditional PowerHouse® Bass Cabinets. These cabinets provide an exceptional level of musical versatility and player convenience through the following features:
6x10 Design Features
Chambered Construction - The Traditional 6x10 cabinets utilize a classic, sealed and chambered design that provides emphasis on focused low-mid punch while still maintaining balance, detail, and clarity across the rest of the frequency range. Combined with the highest quality, void-free Marine Grade Baltic Birch and custom Eminence speakers, the definition and authority of our Traditional 6x10 sets a new standard for sealed bass cabinets!
SPEAKON Connectors - Convenient Inputs and Paralleled Outputs are provided for via "combination" connectors that feature both standard ¼-inch AND locking SPEAKON high-current connections contained within the same connector.
Tilt & Roll Transport System - Provides built-in, hand truck portability with rollerblade-style wheels and rear glide rail protection and heavy-duty metal kickplate.
Like all Mesa® PowerHouse Series Bass Cabinets, the Traditional PowerHouse cabinets represent the world's best-built, best-sounding, easiest-to-move bass enclosures ever made! Make the comparison yourself. Then you'll understand why it's all about Mesa for Bass!
ALL MESA® ENCLOSURES are built by Mesa Master Craftsmen using the finest void-free, Marine Grade Baltic Birch. Super strong rabbet and dado joinery is glued and nailed throughout the cab’s construction, including bracing and most importantly, the front speaker baffle. Grilles are wrapped around a separate grille-board, not the baffle board. Grille material is made of strong twisted jute dipped in a special coating that filters top end for a sweeter response. You simply won't find a better cabinet.
|Build Location||Petaluma, CA USA with the World's Finest Materials|
|Cabinet Material||Marine Grade, Baltic Birch|
|Standard Finish Options||Black Bronco Vinyl with choice of Gray & Black Weave or Black Jute Grille and Silver Piping|
|Custom Finish Options||See Custom Finish Gallery|
Features and Specifications
|Style/Type||Chambered (no porting)|
|Speaker(s) & Mounting Position||Custom Eminence toned for Traditional PH Cabs|
|High Frequency Horn||n/a|
|Cabinet Impedance||4 Ohm (only)|
|Connectors||Combination Speakon & 1/4" Input & Paralleled Output|
|Minimum Impedance @ Frequency|
|Average Sensitivity (RMS) 50Hz-1000Hz|
|Maximum SPL - 50Hz-1000Hz|
|Average Thermal Power (RMS) 50Hz-1000Hz|
|Average Mechanical Power (RMS) 50Hz-1000Hz|
|Minimum Mechanical Power (RMS) @ Frequency|
|Low Freq F3 (Hz)|
|Low Freq F6 (Hz)|
|Low Freq F10 (Hz)|
|High Freq Response|
|Casters||Included - Built-in Tilt & Roll™ Transport System w/Rear Glide Rails|
|Slip Cover||Included - Fitted Slip Cover|
Weight And Dimensions
DISCLAIMER: In the interest of continuous improvement, all specifications are subject to change without notice. To guarantee correct fit on custom ordered cases & covers, MESA recommends that customers make personal measurements of their product, after they have been received. MESA provides these measurements as a general reference only, without guarantee or liability.